Rose measurment

This is a simple tutorial that demonstarte how to describe a rose architecture in Xplo
12.1.2011 - O. Taugourdeau , S. Griffon

Measured plant sketch

Step by step


Step 1 : define Types (Individual, Axis, Internodes, Leaves, Flower) and Scales (1,2,3,4,3)


Step 2 : Decompose (D.) I => Axis ; D. Axis => InterNode ; Ramif. Internode => Leaf


Step 3 : Copy/Paste the Internode on the Axis


Step 4 : associate Type and Symbols and colors


Step 5: Create attributs : Length, Width, RotLocalX, RotBearerY, Ortho. 1st InterNode : 4cm diam 1 2nd InterNode-6cm RotLocalX=170° ; Leaf 1 : Length 10 Width 6 Leaf 2 : Length 12 Width 7


Step 6 : 1st InterNode ramificate into an Axis (decompose into internode, Ramif leaf).


Step 7 : A2-Length=45 and Width=0,6 ; Internode RotLocalX=135 and Ortho=10 ; Leaf RotBearerY=60 Length=16 Width=10


Step 8 : Copy/ Paste (x10) the internode of A2 on A2


Step 9 : Last internode of the A2 is ramificated into an flower-RotBearerY=0 Length=40 Width=5


Step 10 : Copy /Paste A2 on the 2nd InterNode of A1.

roseStep5.jpg (12.7 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM

roseStep6.jpg (20.9 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM

roseStep7.jpg (10.9 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM

roseStep8.jpg (8.45 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM

roseScheme.jpg (20.1 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM

roseStep1.jpg (4.6 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM

roseStep2.jpg (6.33 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM

roseStep3.jpg (7.38 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM

roseStep9.jpg (21.1 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM

roseStep4.jpg (6.21 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM

roseType.jpg (12.2 KB) Sébastien GRIFFON, 01/12/2011 03:03 PM